S-90™ Disk Specifications Minimum/Maximum Pressure with Rating at 72° (22°C)
Note: Consult BS&B for applications where the disk may be rated with a coincident temperature below 300°F (149°C) (176°F (80°C) for Hastelloy) but operated at a higher value. Special processing may be required. Hastelloy® is a trademark of Haynes International Inc. Monel® and Inconel® are registered trademarks of Special Metals Corporation and its subsidiaries.
BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.
After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.
A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.
When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.
Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.
When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.
Our comprehensive range of sanitary Sales Brochure (bursting discs) and holders for use in sanitary/aseptic applications in the pharmaceutical, biotechnology and food processing industries
The GLP-S'" low pressure sanitary Sales Brochure is designed for installation into sanitary/aseptic piping using the LP-C" safety head. The GLP-S adds a new capability for the designer of pharmaceutical, biotechnology, food industry and other clean service pressure relief systems.
A range of sensors suitable for different rupture disk types used to provide immediate warning of a ruptured disk., #77-1003
The compression loaded S-90™ Rupture Disk (Bursting Disc) offers an extended service life under pressure cycling conditions compared to a conventional tension loaded disk. The S-90™ Rupture Disk (Bursting Disc) exhibits excellent fatigue resistance in cyclic pressure service, surviving 1,000,000 pressure cycles from 0-90% of its marked burst pressure. The S-90 is a domed, solid metal, precision scored reverse buckling disk, which, upon over-pressure, reverses and opens along pre-weakened cross-score lines to provide a full relief opening.
The S-90™ Rupture Disk (Bursting Disc) is available in a range of corrosion resistant materials. Standard disk materials are Nickel alloy 200, Stainless Steel grade 316, Monel® (Nickel alloy 400), Inconel® (Nickel alloy 600), Hastelloy® C-276, & Aluminum. Fluoropolymer film liners are offered with the type S-90™ Rupture Disk (Bursting Disc) at all burst pressures. All standard disks are available with 0%, 5%, and 10% manufacturing ranges.
Burst Alert Sensors are installed downstream of the Rupture Disk (Bursting Disc) device and provide a convenient means of generating an electrical signal when appropriately integrated into plant control systems, or connected to the BS&B Safety Systems Burst Disk Monitor. The Burst Alert Sensor is a “membrane switch” that changes from closed circuit to open circuit when the upstream Rupture Disk (Bursting Disc) (or relief valve) opens.
The Sta-Saf family of Rupture Disk (Bursting Disc) devices is designed for installation between pipe flanges. Compatibility with all international flange standards is available, including: ANSI, DIN, JIS, BS, ISO, AFNOR and UNI. Between the Safety Head and the pipe flanges an application compatible gasket is used for sealing purposes.